Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Profile: PeterJohn
Name: PeterJohn Offline
Joined: Thursday, July 20, 2017(UTC)
Last Visit: Wednesday, October 4, 2017 7:26:56 PM(UTC)
Number of Posts: 3
[0.00% of all post / 0.00 posts per day]
Thanks Given: 0 (View Thanks)
Thanks Received: 0
Thanked Posts: 0
Community Reputation Received:
View All Posts by User
Topic: Should I be concerned about how much power a 750-800 Watt PSU can potentially draw $$ wise?   Go to last post
Posted: Monday, August 7, 2017 4:30:13 PM(UTC)
Hi..as per the datasheet that you have referenced, the absolute maximum rating of Vcc is 35 V. You can exceed that at your peril. Never operate at the absolute maximum rating. All test conditions in the datasheet indicate a 30 V maximum, that is probably a good maximum operating point for long term reliability. Those dots are for reference when using coupled inductors. If the 2 inductors are coupled, then the polarity dots should be observed. If not coupled then it does not matter.

prototype pcb assembly services

Topic: How to boost the voltage of CS5173?   Go to last post
Posted: Thursday, July 20, 2017 5:53:18 PM(UTC)
Hi..as per the datasheet that you have referenced, the absolute maximum rating of Vcc is 35 V. You can exceed that at your peril. Never operate at the absolute maximum rating. All test conditions in the datasheet indicate a 30 V maximum, that is probably a good maximum operating point for long term reliability. Those dots are for reference when using coupled inductors. If the 2 inductors are coupled, then the polarity dots should be observed. If not coupled then it does not matter.

pcb assembly china

Topic: How to boost the voltage of CS5173?   Go to last post
Posted: Thursday, July 20, 2017 5:51:27 PM(UTC)
Hi..as per the datasheet that you have referenced, the absolute maximum rating of Vcc is 35 V. You can exceed that at your peril. Never operate at the absolute maximum rating. All test conditions in the datasheet indicate a 30 V maximum, that is probably a good maximum operating point for long term reliability. Those dots are for reference when using coupled inductors. If the 2 inductors are coupled, then the polarity dots should be observed. If not coupled then it does not matter.