faceu
  •  faceu
  • 50.75% (Neutral)
  • Newbie Topic Starter
2016-11-17T08:20:28Z
I'm working on a legacy product, so I can't adjust the crystal or board in any way. It was originally written in PicBasicPro and I'm moving things over to Hi-Tech C.

It's a Pic18F4525  and has a 20Mhz crystal. According to the datasheet, the PLL just multiplies the frequency by 4.

So, this would give me a frequency of 20Mhz

Quote:

__CONFIG(1, HS & IESOEN & FCMEN);

This would give me a frequency of 80Mhz

Quote:

__CONFIG(1, HSPLL & IESOEN & FCMEN);

Surprisingly, by enabling HSPLL, the serial port outputs correctly, lcd still outputs, other than delay times I didn't see anything break.

So, my question is, what frequency is the clock running? Is it really running 80Mhz with PLL? or does the Hi-Tech C compiler know the max clock speed is 40Mhz and limit it there?

I will probably just stay safe and leave it at 20Mhz, but I would have expected serious problems clocking a 40Mhz chip to 80Mhz and didn't see any.

Users browsing this topic