Guest
dagan
  •  dagan
  • 50.2% (Neutral)
  • Member Topic Starter
2002-06-22T08:37:51Z
i have just downloaded powerstrip,
dose any1 know how far i can push my ati radeon 7500 64mb ddr?
GPU was factory set to 270mhz and ddr memory at 200.25mhz
i have got the GPU at 319.50 Mhz and mem is still at factory settings
how far will the GPU go b4 it pops?
b4 i O/C it GPU temp was 33c and mem was maxed 59c at factroy settings
little bit of cutting and glue'n later and i have a good heat sink stuck to the mem chips on my card
ok oc GPU to 319.50 and temp reads 34c when running 3dmark 2001se
and mem hits 31c at factory setting of 200.25Mhz (which is a nice drop from 59c using passive cooling)
i have a front panel with LED display and heat sensors so i can stick them to things inside my pc, that way i can monitor temp of HHD, CPU, GPU, MEMORY ect. just have to flick the switch to which device i want to check (bloody handy thing i can tell ya! heeh)
wot is max temp the GPU can run at also with my memory running cooler will i beable to push the mem higher?
Sponsor
RudyR1999
2002-06-23T04:54:36Z
Not to be rude but there are plenty of sites that overclock ATI's. Why dont you search for them instead of us looking for the info.
pompoen
2002-06-23T05:44:51Z
just try things out, no 2 vid cards are alike. Its gonna be trial and error anyway
dagan
  •  dagan
  • 50.2% (Neutral)
  • Member Topic Starter
2002-06-23T06:54:01Z
Quote:

Originally posted by RudyR1999
Not to be rude but there are plenty of sites that overclock ATI's. Why dont you search for them instead of us looking for the info.

i thought that this forum was to share each others knowledge....
hmm i must be wrong sorry for ask'n :confused:
Dazz
  •  Dazz
  • 50.2% (Neutral)
  • Member
2002-06-23T07:18:20Z
Try this, it supports all Radeon's http://www.rage3d.com/r3dtweak 
Users browsing this topic